Bike Services

IRON

Suitable as a first service for new bikes (4-6 weeks) or between regular
services (3 monthly) on older bikes, as a check-over and tune up.

  • Adjust headset bearing pre-load.
  • Adjust Bottom Bracket bearing pre-load.
  • Check & adjust wheel cones/bearing pre-load. Gears tuned.
  • Brakes adjusted.
  • Chain lubed.
  • Check/tighten all fasteners to specification
  • Tyres inflated to recommended pressure

COPPER

Suitable for all bikes as a regular service (3-6 monthly) to ensure the bike is performing at its optimum level.

IRON service inclusions, plus:

  • Bike wash & degrease drivetrain.

IRON & COPPER service inclusions, plus:

  • Inspect/clean/regrease/reset priority bearings:
    Wheels Trued (on bike)

TITANIUM


Suitable for all bikes on a 12 monthly basis to ensure that optimum performance is maintained and essential maintenance is performed.

IRON and COPPER service inclusions, plus:

inspect/clean/regrease/reset priority bearings:

1.           - Bottom Bracket
- Headset
- Wheel Hubs

Lube pivot points:1.            - Derailleurs
- Jockey Wheels
- Brake Calipers

True Wheels (off the bike)

Replace all cables.

GOLD – Road

Suitable for road bikes on a 2+ yearly basis to ensure that performance
is restored and complete maintenance is performed.

  • IRON, COPPER & TITANIUM service inclusions, plus:
  • A full strip of components to bare frame & rebuild
  • Hydraulic brake bleed is not included – extra to be quoted.

GOLD – MTB

Suitable for MTB's on a 2+ yearly basis to ensure that performance is restored and complete maintenance is performed.

 

  • IRON, COPPER & TITANIUM service inclusions, plus:
  • A full strip of components to bare frame & rebuild
  • Includes removal and refit of suspension components for servicing (additional charges apply – extra to be quoted).
  • Front & Rear Hydraulic Brake bleed.

BIKE WASH

Suitable for all bikes (with a clean drivetrain)

Hand wash & dry of the bike.

BIKE WASH & DEGREASE

Suitable for MTB's on a 2+ yearly basis to ensure that
performance is restored and complete maintenance is performed.

IRON, COPPER & TITANIUM service inclusions, plus:

A full strip of components to bare frame & rebuild

Includes removal and refit of suspension components for servicing (additional charges apply – extra to be quoted).

Front & Rear Hydraulic Brake bleed.

GEAR TUNE

Suitable for all mechanically geared bikes.

  • Tune of the rear derailleur.
  • Tune of the front derailleur.
  • Chain lube.

GEAR TUNE (Elec.)

Suitable for electronically geared bikes.

  • Firmware update when available.
  • Tune of the rear derailleur.
  • Tune of the front derailleur.
  • Chain lube.
  • Battery re-charge.
  • Customisation is additional work & cost – to be quoted.

HANGER ALIGN + REAR GEAR TUNE

Suitable for all bikes with a rear derailleur hanger/dropout.

  • Inspect Hanger for damage and correct alignment to wheel/cassette when possible.
  • Remove and Fit new Hanger if required (+ cost of part).
  • Includes adjustment of rear shifting.

HYDRO. BRAKE BLEED

Suitable for road & MTB's hydraulic braking systems.

  • Complete fluid replacement of front or rear hydraulic brake system.
  • Adjustment of brake calliper alignment.
  • No additional labour for the fitting of store purchased brake pads/disc rotors.

PUNCTURE REPAIR

Suitable for all bikes.

  • Remove and inspect tyre and tube
  • Fit tube and re-fit tyre.
  • Inflate to recommended pressure.

WHEEL TRUE

Suitable for all bikes with spoke wheels.

  • Removal of the tyre/tube from the wheel.
  • Inspect wheel & spokes for any damage.
  • Replace spokes (limit of 2 per wheel with additional cost of the spokes).
  • Perform Lateral and Radial true of the wheel.
  • Check ‘dish’ of the wheel.
  • Refit tyre/tube and inflate to specification.

FIT BAR TAPE

 

Suitable for Road/TT bikes with taped handlebars.

  • Remove old bar tape.
  • Adjust Lever position if required.
  • Fit new store purchased bar tape.

OTHER REPAIRS

Suitable for all bikes.

  • Hourly rate applicable for additional repairs

BIKE BUILD 1

Suitable for all Road & MTB's with hydraulic brakes.

  • Full build/assembly of the frame, wheels & components
    to a roadworthy conditon.

BIKE BUILD 2

Suitable for all Road and MTB's with mechanical brakes & electronic shifting.

  • Full build/assembly of the frame, wheels & components to a roadworthy condition.
  • Includes firmware update and customisation (when required).

.

BIKE BUILD 3

Suitable for all Road and MTB's with hydraulic brakes.

  • Full build/assembly of the frame, wheels & components to a roadworthy condition.
  • Includes hydraulic brake bleed